What are you looking for?
  • Home Tracto Technik GRUNDOBURST STATIC PIPE BURSTING SYSTEMS GRUNDOBURST 800G

    • GRUNDOBURST 800 G

    THE RENOVATOR

    GRUNDOBURST 800G
    THE BEST THING FOR PIPE RENEWAL

    QUICKLOCK BURST RODS
    • Quick locking couplings without thread (QuickLock), no lubrication required, therefore no time consuming screwing together required
    • Quick rod insertion and removal
    • The rods are connected faster than threaded rods
    • Absolutely push and pull resistant
    • Able to negotiate bends
    • Integral production, therefore highly resistant to stress
    • Robust, low-wear as clamping is not required
    • No slipping back of the rods, due to direct force transmission
    • Rod system with convenient rod accessories
    • Longer service life than screwed rods
    • QuickLock bursting rods are available from 35 mm diameter for pipes from ND 50
    • Other rod diameters: 54 mm, 75 mm, 100 mm, 120 mm and 140 mm

    PULLING FORCE MEASUREMENT GRUNDOLOG

    • Monitoring and logging of pulling force imparted on new pipe during installation
    • Performance categories: 150kN, 400kN, 1,250kN, 2,500kN
    • Self-sufficient storage and live transfer of data possible
    • Compact dimensions for small pits
    • Can be applied from a pit in both directions
    • Fast operating cycles and high output
    • Rapid rod pushing through old pipe and during new pipe installation
    • Quick to get started
    • All machine models have remote control
    • Low weight for easy transport
    • Accessories specific to the procedure
    • Stable and job-site specific construction to withstand the highest of loads and strain
    • Long service life and low maintenance effort
    • Ergonomic operation and high level of work safety
    • CE-certified
    TECHNICAL SPECIFICATIONS
    • For pressure and sewer lines ND 3.14 – 15.75 inches up to approx. 328 ft (procedural)
    • Compact dimensions for small pits
    • Rapid work cycles and high performance
    • Fast rod pushing into the old pipe and fast pulling in of the new pipe
    • Can be applied in both directions – from a single pit
    • Rapid machine start
    • One-man operation with remote control
    • Accessories for specific methods

    RENEWAL OF AN ASBESTOS CEMENT SEWAGE PRESSURE LINE WITH GRUNDOBURST 800G

    The Lower Rhine town of Korschenbroich lies between the metropolitan areas of Mönchengladbach, Krefeld, Neuss and Düsseldorf in the west of Germany. Despite the growing population, Korschenbroich with approximately 5.500 ha has never lost its countryside character in all of its districts. After all, approx. 68 % of the total area are used for agriculture, just under 22 % are residential, commercial and transport areas, the rest divided into recreational, forest and water areas.
    TECHNICAL SPECIFICATIONS
     
    PERFORMANCE DATA
    GRUNDOBURST 800G TT B110 metrical
    GRUNDOBURST 800G TT B110 imperial
     Dimensions of rig LxWxH: 66.93 x 28.35 x 26.38 in 1.700 x 720 x 670 mm
     Weight of rig: 1.450 kg 3,196.70 lbs
     Thrust: 256 kN  57,551.10 lbf
     Pulling force at 250 bar: 769 kN 172,878.12 lbf
     Pit size LxW: 4.500 x 1.500 mm 177.17 x 59.06 in
     Axle height: 250 mm 9,84 in
     Drive output at 2,000 rpm • 2,300 rpm • 3,000 rpm:  – • 55,1 • – kW  – • 73.89 • – hp
     Hydr. operating pressure:  250 bar  3,625.95 psi
     Old pipe Ø: ND 80 – ND 400 mm ND 3.15 – ND 15.75 in
     For pipe materials:  PVC, PE, stoneware, ductile/grey cast iron, AC, GFRP, steel  PVC, PE, stoneware, ductile/grey cast iron, AC, GFRP, steel
     New pipe Ø: up to OD 400 mm up to OD 15.75 in
     For pipe materials:  PE, PP, stoneware, grey cast iron, GFRP, steel  PE, PP, stoneware, grey cast iron, GFRP, steel
     Bursting rod Ø:  75 mm  2.95 in
     Bursting rod Ø alternative:  54 (max. 400 kN) mm  2.13 (max. 89,923.60 kN) in
     Bursting rod weight:  13 kg  28.66 lbs
     Effective bursting rod length:  750 mm  29.53 in

    Product Enquiry

    Call me back